Sistem Peringatan Dini Bencana Longsor Menggunakan Sensor Accelerometer dan Sensor Kelembabapan Tanah Berbasis Android
How to cite (IJASEIT) :
Landslide is one of the most frequent disasters in Indonesia, especially in hilly areas, valleys, and volcanoes. Geographical conditions that are generally mountainous areas and have slopes make the soil unstable. As a result, when the movement of the land becomes easy to slide. Ground shifts and excessive water content are the main causes of landslides. The landslide disaster can cause many losses, such as to cause loss of life, can disrupt transportation facilities, damage agricultural land, and various other consequences. In this study used sensor MPU6050 and Soil Moisture and NodeMcu sensors to provide early warning of landslides. Linear acceleration is detected by using MPU6050 sensor and will define the ground movement based on the scenarios developed in this study. Soil moisture sensor detects soil moisture. The result of soil movement detection and soil moisture is stored in file storage. When ground detection and soil moisture is greater than 51%, the alarm alert is sent to the user's smartphone with a 100% success percentage.
[2] Zakaria, Z. 2013. Analisis Kestabilan Lereng Tanah. Year Book Mitigasi Bencana , Jakarta.
[3] Mardhatillah, Elvira, S.Si. 2017. Rancang Bangun Sistem Peringatan Dini Tanah Longsor Berbasis Mikrokontroler Atmega328 Menggunakan Metode Penginderaan Berat. Universitas Andalas. Padang
[4] Susilo, Adi. Didik R. Santoso, Arief Rachmansyah, Yulvi Zaika. 2011. Desain Sistem Peringatan Dini Zona Rawan Longsor Dengan Penerapan Sensor Kelembaban Dan Getaran Pada Tanah.
[5] Sutikno, 2011, Mengenal Tanah Longsor, Direktorat Geologi Tata Lingkungan Departemen Pertambangan dan Energi, Bandung.
[6] Karnawati, D. 2005. Bencana Alam Gerakan Massa Tanah di Indonesia dan Upaya Penanggulangannya. Jurusan Teknik Geologi, Universitas Gadjah Mada, Indonesia.
[7] Karnawati, D, 2011, Bencana Alam Gerakan Tanah Indonesia Tahun 2000, Universitas Gadjah Mada , Yogyakarta.
[8] Wirawan, Rahadi, dkk, 2016, Rancang Bangun Sistem Pendeteksi Tanah Longsor Sederhana Berbasis Sensor Soil Moisture dan Sensor Ultrasonik, Univresitas Mataram, Mataram.
[9] NodeMCUTeam. 2014. NodeMCU connect thing easy.http://www.nodemcu.com/index_en.html diakses pada tanggal 20 Juli 22:12 WIB
[10] Inven Sense. Inc. 2013. MPU-6000 and MPU-6050 Product Specification Revision 3.4
[11] Caesar, P. Y., Isnawaty, dan Fid A. (2016), Rancang bangun Prototype System Monitoring Kelembaban Tanah Melalui SMS Berdasarkan Hasil Penyiraman Tanaman “Studi Kasus Tanaman Cabai dan Tomat”
[12] Indoware, 2015, Soil Moisture sensor,http://indo-ware.com/produk-284-moisture-sensor-.html, diakses pada12 Desember 2017.
[13] Chinetha, K, J.Daphney Joann dan A.Shalini. 2015. An Evolution of Android Operating System and Its Version. IJEAS. 2: 30-33
[14] M. Dongre, Nikhil, Tejas S. Agrawal., Sagar D. Pande. 2017. A Research On Android Technology With New Version Naugat(7.0,7.1). (IOSR-JCE).
[15] Yuniar, Supardi.2014.Semua Bisa Menjadi Programmer Android. Elex Media. Bandung.
[16] Supriyadi, Daud Febrizer, 2016, Sistem Monitoring Pergeseran Tanah Terhadap Potensi Longsor Secara Wireless Berbasis Mikrokontroler, Universitas Airlangga, Surabaya.
[17] Jian He, Chen Hu, Xiaoyi Wang. 2016. A Smart Device Enabled System for Autonomous Fall Detection and Alert. International Journal of Distributed Sensor Networks.
[18] Walin, Fu, H. Zhao, Y. Zhao, H. Zhong. 2015. Development of a wearable-sensor-based fall detection systems. International Journal of Telemedicine and Applications.
[19] Stevanus dan Setiadi, K.. D., 2013, Alat Pengukur Kelembaban Tanah Berbasis Mikrokontroler Pic 16f84, Jurnal Teknik Elektro Universitas Kristen Maranatha,Bandung.
Please find the rights and licenses in the Journal of Information Technology and Computer Engineering (JITCE).
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
2. Author(s)’ Warranties
The author(s) warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).
3. User Rights
JITCE adopts the spirit of open access and open science, which disseminates articles published as free as possible under the Creative Commons license. JITCE permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JITCE on distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- the right to use the substance of the article in future own works, including lectures and books,
- the right to reproduce the article for own purposes,
- the right to self-archive the article.
- the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Journal of Information Technology and Computer Engineering).
5. Co-Authorship
If the article was jointly prepared by other authors; upon submitting the article, the author is agreed on this form and warrants that he/she has been authorized by all co-authors on their behalf, and agrees to inform his/her co-authors. JITCE will be freed on any disputes that will occur regarding this issue.
7. Royalties
By submitting the articles, the authors agreed that no fees are payable from JITCE.
8. Miscellaneous
JITCE will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed and JITCE or its sublicensee has become obligated to have the article published. JITCE may adjust the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.