DOI : https://doi.org/10.25077/jitce.2.02.76-84.2018

Rancang Bangun Alat Ukur Tinggi dan Berat Badan Ideal Berdasarkan Metode Brocha Berbasis Mikrokontroler

Luthfan Maulana (1), Dodon Yendri (2)
(1) Universitas Andalas
(2) Universitas Andalas
Fulltext View | Download
How to cite (IJASEIT) :
Maulana, L., & Yendri, D. (2018). Rancang Bangun Alat Ukur Tinggi dan Berat Badan Ideal Berdasarkan Metode Brocha Berbasis Mikrokontroler. JITCE (Journal of Information Technology and Computer Engineering), 2(02), 76–84. https://doi.org/10.25077/jitce.2.02.76-84.2018
Citation Format :
Body’s height and mass measurement usually are measured with a different instrument without a knowledge to know the ideal body mass index (BMI). Ideal BMI is related to our health condition especially for people who do exercise. Usually people just guess the BMI from a visual condition that sometime give a false measurement. This paper proposes a device that can measured ideal BMI based on Brocha method based on microcontroller. The body’s height will be measured using ultrasonic sensor while the body’s mass will be measured with a load cell. The results show that the proposed device can predict the BMI well. The height measurement has a successful rate of 80%.
[1] Zakky Aulia, 2015. “Rancang Bangun Alat Pengukur Angka Kecukupan Gizi (AKG) dengan Menggunakan Mikrokontroler”. Padang: Tugas akhir sistem komputer. Universitas Andalas
[2] A, Azrul 2010. “Tubuh Sehat Ideal dari Segi Kesehatan”.
[3] Thomas, Johan K.W, dan Henhy (2015). “Sistem Pengukur Berat dan Tinggi Badan Menggunakan Mikrokontroler AT89S51”. Jurnal Tesla. 10(2)
[4]https://panduancara.com/cara-menghitung-berat-badan-ideal/ (Diakses pada 16 Desember 2017)
[5] S.Sarwono. 2001. “Pedoman Praktis Memantau Status Gizi Orang Dewasa Untuk Mempertahankan Berat Badan Normal Berdasarkan Indeks Massa Tubuh”. Jakarta: Gramedia, ch:2, pp:20-32.
[4] Mega Vitriya, 2015. “Pemindai alat biometrik dengan sensor infrared proximity berbasis mikrokontroler”. Padang: Tugas akhir sistem komputer. Universitas Andalas
[5] S.Sarwono. 2001. “Pedoman Praktis Memantau Status Gizi Orang Dewasa Untuk Mempertahankan Berat Badan Normal Berdasarkan Indeks Massa Tubuh”. Jakarta: Gramedia, ch:2, pp:20-32.
[6] https://seimbang.net/cara-menghitung-berat-badan-ideal/ (Diakses pada 23 November 2017)
[7] Arief, Ulfah Mediaty. 2011.“Pengujian Sensor Ultrasonik PING untuk Pengukuran Level Ketinggian dan Volume Air ”. Vol 09, No 02.
[8] Nichols, 1988, “Ultrasonic inspection of heavy section steel”. London: Elsevier applied science, ch:3 pp: 81-92.
[9] Purwanto, Dwi. Tanpa Tahun. “Rancang Bangun Load Cell Sebagai Sensor Gaya pada Sistem Uji.Peneliti Balai Besar Teknologi Kekuatan Struktur” -BPPT. 18:3-4.
[10] Rebby Fudi Alexander.2013.“Aplikasi Sensor Berat Load Cell Pada Alat Pengering Herbal”
[11] Dadan Nurdin Bagenda, M.T, Agung Lucky Herdian. Tanpa tahun. Jurnal Tugas akhir dengan judul “Prototipe Jembatan Timbang Menggunakan Bridge Sensor dan Kamera berbasis Mikrokontroler”. Program Studi Teknik Informatika STMIK LPKIA.
[12] www.dfrobot.com (Diakses pada 17 Agustus 2017)
[13] Setiawan, Edi. 2009. “Alat Ukur Tinggi Badan Digital Menggunakan Ultrasonik Berbasis Mikrokontroler ATMega16 Dengan Tampilan LCD”. Volume XI, No. 2
[14] Banzi, Massimo. 2008 “Gettting Started with Arduino”. O’Reilly.
[15]http://arduino.cc/en/Main/ArduinoBoardUno (Diakses pada 11 Mei 2017)
[16]http://arduino.cc/en/Main/ArduinoBoardUno (Diakses pada 11 Mei 2017)
[17] Setiawan, Edi. 2009. “Alat Ukur Tinggi Badan Digital Menggunakan Ultrasonik Berbasis Mikrokontroler ATMega16 Dengan Tampilan LCD”. Volume XI, No. 2.

1. License

Creative Commons License

 

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. 

2. Author(s)’ Warranties

The author(s) warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).

3. User Rights

JITCE adopts the spirit of open access and open science, which disseminates articles published as free as possible under the Creative Commons license. JITCE permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JITCE on distributing works in the journal.

4. Rights of Authors

Authors retain the following rights:

  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • the right to use the substance of the article in future own works, including lectures and books,
  • the right to reproduce the article for own purposes, 
  • the right to self-archive the article.
  • the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Journal of Information Technology and Computer Engineering).

5. Co-Authorship

If the article was jointly prepared by other authors; upon submitting the article, the author is agreed on this form and warrants that he/she has been authorized by all co-authors on their behalf, and agrees to inform his/her co-authors. JITCE will be freed on any disputes that will occur regarding this issue. 

7. Royalties

By submitting the articles, the authors agreed that no fees are payable from JITCE.

 

8. Miscellaneous

JITCE will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed and JITCE or its sublicensee has become obligated to have the article published. JITCE may adjust the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers. 

Downloads

Download data is not yet available.