- Development of an Automated Water Turbidity Monitoring and CO₂ Injection System for Aquascape Environments -
How to cite (JITCE) :
The purpose of this research is to monitor water turbidity and automatically inject CO₂ into the aquascape, enabling aquascape enthusiasts to identify potential issues related to water quality and plant health when the system is left unattended. Key concerns include water turbidity, lighting conditions, and the distribution of CO₂ in the water. Therefore, a real-time monitoring and automated CO₂ injection system is required. The results of this study show that the system is capable of monitoring water turbidity with an average error of 2.77% and regulating CO₂ distribution based on the predefined schedule. At 13:00 WIB, the lighting is activated, and the solenoid valve opens. At 21:00 WIB, the lighting is turned off, and the solenoid valve closes. If the water becomes turbid, the buzzer automatically activates, and a notification is sent to the user via Telegram.
[2] Elbura Putra, Digo. 2018. Rancang Bangun Kontrol Suhu dan Cahaya pada Aquascape berbasis Mikrokontroler. Skripsi Sarjana Pada sistem Komputer Universitas Andalas Padang.
[3] Raharjo, Sinung. 2018. Sistem Otomatisasi Fotosintesis Buatan pada Aquascape berbasis Arduino. Skripsi Program Studi Teknik Elektro Fakultas Teknik. Universitas Muhammadiyah Ponorogo.
[4] Syukur, Muhtadu. 2019. Impelentasi dan Analisis Pengurasan Otomatis Aquascape berdasarkan Kualitas Air menggunakan Fuzzy Logic. Teknik Informatika. Universitas Telkom Bandung.
[5] Hariyatno, Isanawikrama, D Wimpertiwi, Y.J Kurniawan. 2018. Membaca Peluang Merakit “Uang” dari Hobi Aquascape. Jurnal Pengabdian dan dan Kewirausahaan.
[6] Pratiwi M. 2017. Pengembangan Tutorial Pembuatan Media Aquascape Berbasis Project Based Learning (Pjbl) Pada Materi Ekosistem Siswa Kelas X SMA. Skripsi Ilmu Tarbiyah dan Keguruan Universitas Islam Negeri Raden Intan Lampung
[7] Departemen Kesehatan RI. Keputusan Menteri Kesehatan RI NO.492/MENKES/PER/IV/2010.
[8] Putra, Pratama. 2011. Rancang Bangun Jam Digital Menggunakan RTC (Real Time Clock) Dengan Alarm Berbasis Mikrokontroler. Teknik Informatika Surakarta.
[9] Dfrobot. 2017. Turbidity Sensor SKU: SEN0189. China
[10] Anyanwu, C. N., Mbajiorgu, C. C., & Anoliefo, E. C. (2012). Design and Implementation of a Water Level. Nigerian Journal of Technology (NIJOTECH), 89-92.
[11] Artha, Onny Octaviani, Budi Rahmadya, Rahmi Eka Putri. 2018. Sistem Peringatan Dini Bencana Longsor menggunakan Sensor Accelometer dan Sensor Kelembapan Tanah berbasis Android. Jurnal of Information Technology and Computer Engineering. 2(2): 14-20
[12] Adam.2019. Interview of Motor Servo. Padang: C.V Mikro Elektronik
[13] Elfiristi, Paskar Sadiq. 2018. Rancang Bangun Robot Penampung Sampah Berbasis Mikrokontroler. Universitas Andalas: Padang.
[14] Membuat CO2 DIY Aquaescape melalui https://www.hewanpeliharaan.org/aquascape/membuat-co2-diy-aquascape/. Diakses pada 14 Februari 2021, jam 17.00 WIB.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Please find the rights and licenses in the Journal of Information Technology and Computer Engineering (JITCE).
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
2. Author(s)’ Warranties
The author(s) warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).
3. User Rights
JITCE adopts the spirit of open access and open science, which disseminates articles published as free as possible under the Creative Commons license. JITCE permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JITCE on distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- the right to use the substance of the article in future own works, including lectures and books,
- the right to reproduce the article for own purposes,
- the right to self-archive the article.
- the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Journal of Information Technology and Computer Engineering).
5. Co-Authorship
If the article was jointly prepared by other authors; upon submitting the article, the author is agreed on this form and warrants that he/she has been authorized by all co-authors on their behalf, and agrees to inform his/her co-authors. JITCE will be freed on any disputes that will occur regarding this issue.
7. Royalties
By submitting the articles, the authors agreed that no fees are payable from JITCE.
8. Miscellaneous
JITCE will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed and JITCE or its sublicensee has become obligated to have the article published. JITCE may adjust the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.