Rancang Bangun Mesin Pembuat Minuman Kopi Otomatis Berbasis Arduino UNO dengan Kontrol Android

Article Sidebar

JITCE
PDF
Published Mar 29, 2019
DOI https://doi.org/10.25077/jitce.3.01.25-29.2019

Main Article Content

Nini Firmawati
Jurusan Fisika FMIPA, Univ. Andalas
Gentha Farokhi Wildian Wildian

Abstract

Design of automatic coffee drink maker machine based on arduino uno has been successfully done. Coffee drink maker machine system consists of four parts, namely the selection of the menu of coffee drinks, detection of coffee cups, pouring coffee, sugar and cream and pouring water. The selection of coffee drinks menu is done through applications on android smartphone which is connected to the engine via a bluetooth module HC-06. Detection of cup using the censor of photodiodes. Coffee, sugar, and cream is poured and measured using solenoid doorlock. For pouring water using velve selenoid. There are three menu choices on a machine that are bitter coffee, sweet coffee, and cream coffee. For the production of bitter coffee drinks solenoid doorlock pouring coffee an average 5.03 grams in 3 seconds. For the production of sweet coffee drinks solonoid doorlock coffee pouring an average 5.33 grams sugar and pouring an average 17.50 grams within 8 seconds. For the production of coffee cream solenoid doorlock pouring coffee an average 5.27 grams, pouring sugar an average 17.46 grams and pouring cream an average 5.42 grams within 11 seconds. For pouring water using velve solonoid and stops automatically when the distance between the sensor and the surface of the ultrasonic water reaches 5 cm by the time pouring over the last 13 seconds.

Downloads

Download data is not yet available.

Article Details

How to Cite
Firmawati, N., Farokhi, G., & Wildian, W. (2019, March 29). Rancang Bangun Mesin Pembuat Minuman Kopi Otomatis Berbasis Arduino UNO dengan Kontrol Android. JITCE (Journal of Information Technology and Computer Engineering), 3(01), 25-29. https://doi.org/https://doi.org/10.25077/jitce.3.01.25-29.2019
Issue
Vol 3 No 01 (2019): Journal of Information Technology and Computer Engineering
Section
Articles

1. License

Creative Commons License

 

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. 

2. Author(s)’ Warranties

The author(s) warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).

3. User Rights

JITCE adopts the spirit of open access and open science, which disseminates articles published as free as possible under the Creative Commons license. JITCE permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JITCE on distributing works in the journal.

4. Rights of Authors

Authors retain the following rights:

  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • the right to use the substance of the article in future own works, including lectures and books,
  • the right to reproduce the article for own purposes, 
  • the right to self-archive the article.
  • the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Journal of Information Technology and Computer Engineering).

5. Co-Authorship

If the article was jointly prepared by other authors; upon submitting the article, the author is agreed on this form and warrants that he/she has been authorized by all co-authors on their behalf, and agrees to inform his/her co-authors. JITCE will be freed on any disputes that will occur regarding this issue. 

7. Royalties

By submitting the articles, the authors agreed that no fees are payable from JITCE.

 

8. Miscellaneous

JITCE will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed and JITCE or its sublicensee has become obligated to have the article published. JITCE may adjust the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers. 

References

1] Artanto dan Dian., 2012, Interaksi Arduino dan Labview, PT Elex Media Komputindo, Jakarta
[2] Boyihsan., 2016, Rancang Bangun Overhead Crane dengan Wireless Control Menggunakan Android Berbasis Arduino, Skripsi, Teknik Elektro UNP, Padang
[3] Danel, G., 2012, Otomatisasi Keran Dispenser Berbsis Mikrokontroler AT89S52 Mengunakan Sensor Fotodioda dan Sensor Ultrasonik PING ,Jurnal Fisika Unand, Vol.1,No,1, Universitas Andalas
[4] Heryanto dan Ary, M., 2008, Pemograman Bahasa C untuk Mikrokontroler AtMega8535, ANDI, Yogyakarta.
[5] Kadir, A., 2012, Panduan Praktis Memepelajari Aplikasi Mikrokontroler dan Pengrograman Menggunakan Arduino, Andi, Yogyakarta
[6] Kalsum, T.U. dan Ginta, P.W., 2012, Rancangan Alat Pembuat Minuman Kopi Otomatis Mengunaka Mikrokontroler MCS51, Jurnal Media Infotama, Vol.8, No.2, Universitas Dahasen
[7] Marella, B,A., Harianto, dan Wibowo, M.C., 2012, Rancang Bangun Mesin Pembuat Minuman Kopi Otomatis Berbasis Mikrokontroler Dengan Metode Fuzzy, Jurnal of Control and Network System, Vol.4, No.2, STIMIK STIKOM Surabaya